Hub 5x WORKING modem mode
after reading another user post I managed to get the modem working on the Hub 5x , I did the following step, and the only caveat is you can not use the 10Gbe port.
- Connect your own router to one of the 1Gb port (1-3) whilst having the fibre and power also connected but no other ethernet or wireless clients
- via your own router LAN side access the VM Hub (the reason for this is the hub only sees the WAN MAC address of your router and no others)
- now factory reset the Hub
- once the Hub has rebooted browse to http://192.168.0.1 and configure the password for it, once you are on the standard status page access http://192.168.0.1/?page=modemmode and enable it.
- the Hub should reboot and assign your device an IP if it does not try and power cycle your device. it can take several minutes to assign so be patient.