Not another Luckfox Mini B internal mod.
Bought a heavily corroded PS4 slim 10.01 for $30 AUD dead no power. Purchased from a young dude living right next to the beach.
Booted with a disc insert but no display. Replaced the power button board.
Both USB ports were completely corroded and no 5v. Replaced the ports and the corresponding PXGI mosfets and got them working.
Found the Ethernet port mangled with blown caps on the circuit near the alternative tx/rx solder points so just removed the caps and resistors. Wasn’t sure if the PPPwn exploit would work.
Finally removed the HDMI ic and cleaned the pads soldered it back and got display.
To my surprise none of the immediate LAN circuit near the connector is needed when using the test pad for the Luckfox.
On top of the fan was the only suitable place I could fit the Luckfox.
Bought a heavily corroded PS4 slim 10.01 for $30 AUD dead no power. Purchased from a young dude living right next to the beach.
Booted with a disc insert but no display. Replaced the power button board.
Both USB ports were completely corroded and no 5v. Replaced the ports and the corresponding PXGI mosfets and got them working.
Found the Ethernet port mangled with blown caps on the circuit near the alternative tx/rx solder points so just removed the caps and resistors. Wasn’t sure if the PPPwn exploit would work.
Finally removed the HDMI ic and cleaned the pads soldered it back and got display.
To my surprise none of the immediate LAN circuit near the connector is needed when using the test pad for the Luckfox.
On top of the fan was the only suitable place I could fit the Luckfox.